Wind turbine 5KW system

The system includes the following components: Turbine, maglev generator, 8 meter tower (standard), 5.12kWh battery, controller, deye inverter and dump load.

Rated power: 5kW
Peak power: 5,5kW
Rated voltage: 96/220/380 V AC
Starting wind speed: 2.8 m/s
Rated wind speed: 12m/s (max. output)
Survival wind speed: 45m/s
Number of blades: 3
Rotor diameter: 5,5m
Tower height: 8, 10 or 12m
Sweep area: 21.23m2
Blade material: fibreglass reinforced composite
Generator type: 3 phase permanent magnet generator
Generator housing material: cast carbon steel
Tower connector: flange
Working temperature range: -40°C to 60°C
Product life: 20 years
Warranty: 2 years
Applications: on/off grid solar and wind hybrid system etc.

Wind turbine rated power: 5kW
Wind turbine rated voltage: AC220V
Function: rectifier, control, DC output
Automatic protection function: overvoltage protection, mains blackout protection, regulated input output, stop switch
Manual function: manual cut-off, reset, emergency switch
Display type: LCD
Display content: wind turbine voltage, current, power; solar voltage, current, power; DC output voltage, DC output current, DC output power, total power.
PWM constant voltage: ≥320dc
Wind turbine 3-phase discharge load voltage: 350±5Vdc
Wind turbine 3-phase discharge load time delay: 12-20 min
Solar panel fuse: 5A
Working ambient temperature: -30-60°C
Relative humidity:＜90% No condensation
Noise (1m): ＜40dB
Degree of protection: IP20 (indoor) IP65 (outdoor)
Cooling method: Forced air cooling
Communication interface (optional): RS485/USB/GPRS/WIFI/Ethernet
Temperature compensation (optional): -4mv/°C/2V, -35°C~+80°C, Accuracy: ±1°C
Controller size (mm): 510*360*240
Controller weight: 18Kg